Air Compressor Vacuum Pump

Air Compressor Vacuum Pump
Details:
Roots vacuum pump is a vacuum pump without internal compression, usually with a very low compression ratio, and needs to be used in series with the preceding vacuum pump.
Send Inquiry
Description
Send Inquiry

 

Products Description

 
2001

Roots vacuum pump is a vacuum pump without internal compression, usually with a very low compression ratio, and needs to be used in series with the preceding vacuum pump.

  • During operation, the suction port is connected to the main vacuum pump of the evacuated container or vacuum system.
  • As a pair of rotors rotate synchronously in the opposite direction, the evacuated gas is sucked into the space v0 between the rotor and the pump casing through the inlet port.
baiduimg.webp

 

After inhalation, the v0 space is in a fully enclosed state, and the gas is not compressed or expanded in the pump chamber. When the top of the rotor rotates past the edge of the exhaust port, the v0 space is connected to the exhaust side.

baiduimg.webp

 

Due to the high gas pressure on the exhaust side, some gas rushes back into the v0 space, causing a sudden increase in gas pressure. Then the rotor continues to rotate and the gas is discharged outside the pump.

 

 
product-800-400

Safe and stable

In the field of air compressors, Roots vacuum pumps are often combined with other vacuum pumps to form vacuum units, which are used to increase the vacuum degree of the system. In addition, it is widely used in smelting, degassing, and rolling in vacuum metallurgy; Vacuum distillation, vacuum concentration, and vacuum drying in the chemical industry; Vacuum packaging in the food industry; The production, drying, and concentration of drugs in the pharmaceutical industry; And vacuum environment preparation in the manufacturing process of semiconductor devices in the electronics industry.

Good sealing performance

Attention should be paid when maintaining the machine: check the rotor clearance to ensure it is within the normal range, and prevent the pump performance from being affected by clearance changes; Check the sealing components to prevent gas leakage. Lubrication and maintenance: For components that require lubrication (such as gears and bearings cooled by internal oil), replace the lubricating oil according to regulations to ensure lubrication effectiveness. Regularly clean the dust, impurities, etc. in the pump chamber and inlet to prevent affecting the pumping efficiency and normal operation of the pump.

product-800-400

 

 

Hot Tags: air compressor vacuum pump, China air compressor vacuum pump manufacturers, suppliers, factory, air compressorair gas liquid separator, air compressor gas tank, diy vacuum pump from compressor, electrical machinery for air compressor air, 6 2 diesel spin on fuel filter conversion, compressed air carbon filter

Send Inquiry