Dry Oil Free Screw Air Compressor

•The original imported air end, large rotor, low speed, complete machine performance is excellent.Rotor by the dynamic and static balance test strictly, make itwork better balance, less vibration, lower noise, at the same time under the condition of the same diameter, the length of the rotor increases, effective compression volume increase. so as to achieve air supply increase, reduce power consumption.
•The dry oil-free rotor surface is coated with a special Teflon (PTFE) or molybdenum disulfide super-coating. This coating is highly resistant to high temperatures and corrosion, and can maintain a very small rotor gap under large temperature differences, minimizing gas backflow leakage and ensuring long-term high volumetric efficiency. The graphite rings or labyrinth seals used have excellent high-temperature resistance and can withstand instantaneous exhaust temperatures of up to 200°C or higher, ensuring the equipment operates continuously and stably for 24 hours.

• Systematic design: the technical personnel to the system optimization design to make the unit operation fault greatly reduced, the air volume is more stable, energy consumption than the advanced ranks of the peers.
The whole machine is designed with low noise

•Long life, key conponents all choose imported brand, reliable quality, stable operation.
Low maintenance cost:Dry oil-free machines require almost no replacement of the oil removal filter element. The condensate water discharged by dry oil-free machines is completely clean, oil-free, environmentally friendly water that can be directly discharged. Since there are no multi-stage oil removal filters, the pipeline system does not suffer from the pressure loss (drop) caused by multiple layers of filtration. For every 1 bar reduction in pressure drop, approximately 7% of electricity can be saved.